GSO EN 13501-2:2024

EN 13501-2:2023
مواصفة قياسية خليجية   الإصدار الحالي · اعتمدت بتاريخ ١٤ أكتوبر ٢٠٢٤

تصنيف الحريق لمنتجات وعناصر البناء - الجزء 2: التصنيف على أساس مقاومة الحريق و/أو بيانات اختبار التحكم في الدخان، باستثناء خدمة التهوية

ملفات الوثيقة GSO EN 13501-2:2024

الإنجليزية 86 صفحات
الإصدار الحالي اللغة المرجعية

مجال الوثيقة GSO EN 13501-2:2024


This document specifies the procedure for classification of construction products and building elements using data from fire resistance and/or smoke leakage/control tests and/or mechanical tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this document. This document deals with: a) loadbearing elements without a fire separating function: - walls; - floors; - roofs; - beams; - columns; - balconies; - walkways; - stairs. b) loadbearing elements with a fire separating function, with or without glazing, services and fixtures: - walls; - floors; - roofs; - raised floors. c) products and systems for protecting elements or parts of the works: - ceilings with no independent fire resistance; - fire protective coatings, claddings and screens; d) non-loadbearing elements or parts of works, with or without glazing, services and fixtures: - partitions; - facades (curtain walls) and external walls; - ceilings with independent fire resistance; - raised floors; - fire resisting doorsets, shutter assemblies and openable windows and their closing devices; - smoke control doorsets and shutter assemblies and their closing devices; - conveyor systems and their closures; - penetration seals; - linear joint seals; - combined penetration seals; - service ducts and shafts; - air transfer grilles. - chimneys. e) wall and ceiling coverings with fire protection ability. f) lift landing doors which are tested according to EN 81-58 are excluded from this document. Lift landing doors which are tested in accordance with EN 1634-1 are classified in accordance with 7.5.5. Relevant test methods which have been prepared for these construction products are listed in Clauses 2 and 7.

الأكثر مبيعاً في قطاع التشييد والبناء

GSO 1427:2008
 
مواصفة قياسية خليجية
الأدوات الصحية الخزفية - المراحيض الغربية
GSO 1431:2002
 
لائحة فنية خليجية
الأدوات الصحية - أجهزة الطرد المضغوطة
GSO 2489:2015
 
مواصفة قياسية خليجية
خصائص الركام الناتج من إعادة تدوير مخلفات الإنشاء لاستخدامه في أعمال الإنشاء
GSO 1421:2002
 
لائحة فنية خليجية
الطوب الكبير (البلوك) المفرغ المصنوع من الطين المحروق للحوائط

اعتمدت مؤخراً في قطاع التشييد والبناء

GSO ISO 679:2026
ISO 679:2009 
مواصفة قياسية خليجية
الأسمنت - طرق اختبار - تقدير القوة
GSO ISO 50002-2:2026
ISO 50002-2:2025 
مواصفة قياسية خليجية
تدقيق الطاقة - الجزء 2: إرشادات لإجراء تدقيق الطاقة باستخدام ISO 50002-1 في المباني
GSO ASTM C1170/C1170M:2026
ASTM C1170/C1170M:20 
مواصفة قياسية خليجية
طريقة الاختبار القياسية لتقدير قوام وكثافة الخرسانة المدكوكة باستخدام منضدة اهتزازية
GSO EN 13888-1:2026
EN 13888-1:2022 
مواصفة قياسية خليجية
ترويبة لبلاط السيراميك – الجزء 1: المتطلبات والتصنيف والتعيين والعلامات وبطاقة البيانات