GSO IEC 62803-2:2025
IEC 62803-2:2024
Gulf Standard
Current Edition
·
Approved on
14 October 2025
Transmitting and receiving equipment for radiocommunication - Frequency response of optical-to-electric conversion device in high-frequency radio-over-fibre systems - Part 2: Measurement method of common-mode rejection ratio of optical coherent detection device for radio-over-fibre transmitter
GSO IEC 62803-2:2025 Files
English
15 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO IEC 62803-2:2025 Scope
IEC 62803-2:2024 provides the measurement method of the common-mode rejection ratio of optical coherent detection devices in high-speed RoF systems, as well as in high-speed optical signal transmission systems. In addition, the method is also effective for the estimation of the detailed frequency response of the common-mode rejection ratios and O/E conversion efficiency. The method applies for the following:
- frequency range: 1 GHz to 110 GHz;
- wavelength band: 0,8 µm to 2,0 µm.
The use of optical coherent detection devices for high-speed RoF system is shown in Annex A as an example.
- frequency range: 1 GHz to 110 GHz;
- wavelength band: 0,8 µm to 2,0 µm.
The use of optical coherent detection devices for high-speed RoF system is shown in Annex A as an example.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
GSO 2693:2022
Gulf Standard
The GCC Terrestrial Radio Receiver Specifications for AM/FM/T-DAB+
Recently Published from Electrical Sector
GSO IEC 62973-3:2025
IEC 62973-3:2024
Gulf Standard
Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 3: Lead acid batteries
GSO IEC 60352-2:2025
IEC 60352-2:2024
Gulf Standard
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance
GSO IEC 60034-2-3:2025
IEC 60034-2-3:2024
Gulf Standard
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors
GSO IEC 60404-12:2025
IEC 60404-12:2023
Gulf Standard
Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet
Select GSO Member Stores
