GSO ISO/TS 20459:2025

ISO/TS 20459:2023
Gulf Standard   Current Edition · Approved on 22 April 2025

Road vehicles — Injury risk functions for advanced pedestrian legform impactor (aPLI)

GSO ISO/TS 20459:2025 Files

English 157 Pages
Current Edition Reference Language

GSO ISO/TS 20459:2025 Scope

This document provides definitions, symbols and injury probability functions (IPFs) for the thigh, leg and knee intended to be used with the advanced pedestrian legform impactor (aPLI), a standardized pedestrian legform impactor with an upper mass for pedestrian subsystem testing of road vehicles. They are applicable to impact tests using the aPLI at 11,1 m/s involving:

    vehicles of category M1, except vehicles with a maximum mass above 2 500 kg and which are derived from N1 category vehicles and where the driver’s position, the R-point, is either forward of the front axle or longitudinally rearwards of the front axle transverse centreline by a maximum of 1 100 mm;

    vehicles of category N1, except where the driver’s position, the R-point, is either forward of the front axle or longitudinally rearwards of the front axle transverse centreline by maximum of 1 100 mm;

    impacts to the bumper test area defined by References [1] and [2];

    pedestrian subsystem tests involving use of a legform for the purpose of evaluating compliance with vehicle safety standards.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 2698:2022
 
Gulf Standard
Technical Requirements for Electric Vehicles

Recently Published from Mechanical Sector

GSO ISO 19438:2025
ISO 19438:2023 
Gulf Standard
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity
GSO ISO/TR 5262:2025
ISO/TR 5262:2023 
Gulf Standard
Motorcycles — Guideline for verification of total running resistance force during mode running on a chassis dynamometer
GSO ISO/TS 22133:2025
ISO/TS 22133:2023 
Gulf Standard
Road vehicles — Test object monitoring and control for active safety and automated/autonomous vehicle testing — Functional requirements, specifications and communication protocol
GSO ISO 23117-1:2025
ISO 23117-1:2023 
Gulf Standard
Agricultural and forestry machinery — Unmanned aerial spraying systems — Part 1: Environmental requirements