GSO ASTM C474:2024
ASTM C474:15(2020)
Gulf Standard
Current Edition
·
Approved on
25 April 2024
Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
GSO ASTM C474:2024 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ASTM C474:2024 Scope
These test methods cover the physical testing of joint treatment materials such as joint compound, paper joint tape, glass-mesh joint tape, and an assembly of joint compound and paper joint tape. These materials are used in gypsum board construction. The test methods are detailed for the following: joint compound tests—for viscosity, shrinkage, check cracking, and putrefaction; joint tape tests—for tensile strength, width, and thickness; paper joint tape tests—for dimensional stability; assemblages of paper joint tape and joint compound—for bond of paper joint tape to joint compound and cracking of joint compound at tape edges; and glass-mesh joint tape test—for skewness.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices

GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets

GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls

GSO 2084:2010
Gulf Standard
Design and application of speed control humps

Recently Published from Construction and Building Sector
GSO ISO 6781-1:2024
ISO 6781-1:2023
Gulf Standard
Performance of buildings
— Detection of heat, air and moisture irregularities in buildings by infrared methods
— Part 1: General procedures


GSO ISO 19467-2:2024
ISO 19467-2:2021
Gulf Standard
Thermal Performance of windows and doors
— Determination of solar heat gain coefficient using solar simulator
— Part 2: Centre of glazing


GSO EN 13501-5:2024
EN 13501-5:2016
Gulf Standard
Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests

GSO ASTM C1527/C1527M:2024
ASTM C1527/C1527M:23
Gulf Standard
Standard Specification for Travertine Dimension Stone

