GSO ECE R 160:2024
ECE R 160:2021
Gulf Standard
Current Edition
·
Approved on
31 January 2024
Uniform provisions concerning the approval of motor vehicles with regard to the Event Data Recorder
GSO ECE R 160:2024 Files
English
0 Pages
Current Edition
Reference Language
Free
GSO ECE R 160:2024 Scope
1.1. This Regulation applies to the approval of vehicles of categories M1 and N11 with regard to their Event Data Recorder (EDR).
1.2. This Regulation is without prejudice to requirements of national or regional laws related to privacy, data protection and personal data processing.
1.3. The following data elements are excluded from the scope: VIN, associated vehicle details, location/positioning data, information of the driver, and date and time of an event.
1.4. If there is no system or sensor designed to provide the data element to be recorded and stored under section 3, in the format (range, resolution, and sample rate) indicated in Annex 4. "DATA ELEMENTS" or it is not operational at the time of recording, this document requires neither recording of such data nor fitting or making such systems or sensors operational. However, if the vehicle is fitted with an original equipment manufacturer sensor or system designed to provide the data element in the format specified in Annex 4. "DATA ELEMENTS", then it is mandatory to report the data element in the specified format when the sensor or system is operational. In the case the reason for not being operational at the time of recording is a failure of this system or sensor, this failure state shall be recorded by the EDR as defined in the data elements Annex 4. Data elements.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 2698:2022
Gulf Standard
Technical Requirements for Electric Vehicles
Recently Published from Mechanical Sector
GSO ISO 22705-3:2026
ISO 22705-3:2024
Gulf Standard
Springs — Measurement and test parameters — Part 3: Cold formed cylindrical helical torsion springs
GSO ISO 6535:2026
ISO 6535:2015
Gulf Standard
Portable chain-saws — Chain brake performance
GSO ISO 8210:2026
ISO 8210:2021
Gulf Standard
Equipment for harvesting — Combine harvesters — Test procedure and performance assessment
GSO ISO 14732:2026
ISO 14732:2025
Gulf Standard
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials