GSO ISO/IEC Guide 98-6:2023

Gulf Standard   Current Edition
· Approved on 10 September 2023 ·

Uncertainty of measurement — Part 6: Developing and using measurement models

Metrology and measurement in general
Including measuring instruments in general, preferred numbers, standard measures, general aspects of reference materials, etc.

GSO ISO/IEC Guide 98-6:2023 Files

English 0 Pages
Current Edition Reference Language

GSO ISO/IEC Guide 98-6:2023 Scope

This document provides guidance on developing and using a measurement model and also covers the assessment of the adequacy of a measurement model. The document is of particular interest to developers of measurement procedures, working instructions and documentary standards. The model describes the relationship between the output quantity (the measurand) and the input quantities known to be involved in the measurement. The model is used to obtain a value for the measurand and an associated uncertainty. Measurement models are also used in, for example, design studies, simulation of processes, and in

engineering, research and development.

This document explains how to accommodate in a measurement model the quantities involved. These quantities relate i) to the phenomenon or phenomena on which the measurement is based, that is, the measurement principle, ii) to effects arising in the specific measurement, and iii) to the interaction with the artefact or sample subject to measurement.

The guidance provided is organised in accordance with a work flow that could be contemplated when developing a measurement model from the beginning. This work flow starts with the specification of the measurand (clause 6). Then the measurement principle is modelled (clause 7) and an appropriate form of the model is chosen (clause 8). The basic model thus obtained is extended by identifying (clause 9) and adding (clause 10) effects arising from the measurement and the artefact or sample subject to measurement. Guidance on assessing the adequacy of the resulting measurement model is given in clause 12. The distinction between the basic model and the (complete) measurement model in the work flow should be helpful to those readers who already have a substantial part of the measurement model in place, but would like to verify that it contains all effects arising from the measurement so that it is fit for purpose.

Guidance on the assignment of probability distributions to the quantities appearing in the measurement model is given in JCGM 100:2008 and JCGM 101:2008. In clause 11, this guidance is supplemented by describing how statistical models can be developed and used for this purpose.

When using a measurement model, numerical problems can arise including computational effects such as rounding and numerical overflow. It is demonstrated how such problems can often be alleviated by expressing a model differently so that it performs well in calculations. It is also shown how a reformulation of the model can sometimes be used to eliminate some correlation effects among the input quantities when such dependencies exist.

Examples from a number of metrology disciplines illustrate the guidance provided in this document.

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015 
Gulf Standard
Labeling requirements for prepackages
GSO OIML R121:2007
OIML R 121:1996 
Gulf Standard
The Scale of Relative Humidity of Air Certified Against Saturated Salt Solutions
GSO OIML R 76-1:2009
OIML R 76-1:2006 
Gulf Standard
Non-automatic weighing instruments – Part 1: Metrological and technical requirements - Tests

Recently Published from Metrology Sector

GSO ISO 10360-10:2024
ISO 10360-10:2021 
Gulf Standard
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers
GSO ISO 7626-5:2024
ISO 7626-5:2019 
Gulf Standard
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
GSO IEC 62828-4:2024
IEC 62828-4:2020 
Gulf Standard
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
GSO ISO 11807-1:2024
ISO 11807-1:2021 
Gulf Standard
Integrated optics — Vocabulary — Part 1: Optical waveguide basic terms and symbols