GSO IEC 62893-3:2022
Gulf Standard
Current Edition
Approved on
12 May 2022
Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V
GSO IEC 62893-3:2022 Files
No files are available for this standard right now!
You can buy this standard from any member store
GSO IEC 62893-3:2022 Scope
IEC 62893-3:2017(E) applies to cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1. The cables are of rated voltages U0/U up to and including 450/750 V. Ordinary duty cables with rated voltage 300/500 V are only permitted for charging mode 1 of IEC 61851-1.
Maximum conductor operating temperature for the cables in this document is 90 ºC.
Maximum conductor operating temperature for the cables in this document is 90 ºC.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners

GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES

GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines

GSO 1899:2016
Gulf Standard
GCC Standard voltages and frequencies for AC transmission and distribution systems

Recently Published from Electrical Sector
GSO IEC 61853-2:2023
IEC 61853-2:2016
Gulf Standard
Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements


GSO IEC TS 63126:2023
IEC TS 63126:2020
Gulf Standard
Guidelines for qualifying PV modules, components and materials for operation at high temperatures


GSO IEC TS 60034-34:2023
IEC TS 60034-34:2020
Gulf Standard
Rotating electrical machines - Part 34: AC adjustable speed rolling mill motors


GSO IEC TS 62898-3-1:2023
IEC TS 62898-3-1:2020
Gulf Standard
Microgrids - Part 3-1: Technical requirements - Protection and dynamic control

