GSO ASTM C1713:2021
ASTM C1713:17
Gulf Standard
Current Edition
·
Approved on
01 July 2021
Standard Specification for Mortars for the Repair of Historic Masonry
GSO ASTM C1713:2021 Files
English
11 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ASTM C1713:2021 Scope
1.1 This specification covers mortar for the repair of masonry that was constructed with methods and materials that pre-date the origination of current standards of construction that are compatible with it. The mortar may be used for non-structural purposes such as repointing of the masonry, or for structural purposes such as, but not restricted to, re-construction or repair of mortar joints that contribute to the structural integrity of the masonry.
1.2 Masonry includes the following units laid in mortar: (1) cast stone, (2) clay masonry unitsbrick and clay tile, (3) concrete masonry units, (4) natural stone, and (5) terra cotta.
1.3 This specification may be used to pre-qualify mortar for a project.
1.4 Mortars tested using this specification are laboratory-prepared mortars and do not represent in-place, site mortars.
1.5 Use of this specification should be based on a thorough understanding of the function, maintenance, and repair requirements for the preservation and continued performance of the masonry in the context of the building structure and long-term performance. The user of this specification is responsible for examining all criteria and selecting the appropriate mortar formulation and properties required.
1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Best Sellers From Construction and Building Sector
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 2489:2015
Gulf Standard
Specifications of Recycled Aggregates from Construction
Waste to be used in construction Works
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
Recently Published from Construction and Building Sector
GSO ISO 50002-2:2026
ISO 50002-2:2025
Gulf Standard
Energy audits — Part 2: Guidance for conducting an energy audit using ISO 50002-1 in buildings
GSO ASTM C1170/C1170M:2026
ASTM C1170/C1170M:20
Gulf Standard
Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
GSO ISO 679:2026
ISO 679:2009
Gulf Standard
Cement — Test methods — Determination of strength
GSO ISO 13824:2026
ISO 13824:2020
Gulf Standard
Bases for design of structures — General principles on risk assessment of systems involving structures