GSO ASTM D7297:2021

Gulf Standard   Current Edition
· Approved on 01 July 2021 ·

Standard Practice for Evaluating Residential Indoor Air Quality Concerns

Ambient atmospheres
Including indoor air

GSO ASTM D7297:2021 Files

English 28 Pages
Current Edition Reference Language

GSO ASTM D7297:2021 Scope

1.1 This standard practice describes procedures for evaluating indoor air quality (IAQ) concerns in residential buildings. 1.2 The practice primarily addresses IAQ concerns encountered in single-family detached and attached (for example, townhouse or duplex design) residential buildings. Limited guidance is also included for low- and high-rise multifamily dwellings. 1.3 The IAQ evaluation procedures are comprised of interviews with the homeowner or resident(s) (including telephone interviews and face-to-face meetings) and on-site investigations (including walk-through, assessment, and measurements). For practicality in application, these procedures are divided into three separate phases, which may occur over one or more site visits. 1.4 The procedures described in this standard practice are aimed at identifying potential causes contributing to the IAQ concern. Such findings should become a basis for recommending corrective measures. This standard practice does not describe problem resolution or corrective measures and the standard is not intended to evaluate the impact of corrective measures. 1.5 This practice describes a pathway for characterizing indoor air, though adherence to this practice does not guarantee that an investigator will be able to identify or resolve an IAQ complaint for one or more of the following reasons: (1) the diversity of sources and contaminants in indoor air; (2) other factors that may affect occupant perception and acceptance of indoor air quality, such as air temperature, humidity, noise, lighting, and psychological stress; (3) the range of susceptibility in the population.

Best Sellers From Construction and Building Sector

GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls

Recently Published from Construction and Building Sector

GSO ISO 12241:2024
ISO 12241:2022 
Gulf Standard
Thermal insulation for building equipment and industrial installations — Calculation rules
GSO EN 772-11:2024
EN 772-11:2011 
Gulf Standard
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
GSO ASTM C778:2024
ASTM C778:21 
Gulf Standard
Standard Specification for Standard Sand
GSO ASTM C1157/C1157M:2024
ASTM C1157/C1157M:23 
Gulf Standard
Standard Performance Specification for Hydraulic Cement