GSO ASTM D7143:2021
ASTM D7143:17
Gulf Standard
Current Edition
·
Approved on
01 July 2021
Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
GSO ASTM D7143:2021 Files
English
20 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ASTM D7143:2021 Scope
1.1 This practice is intended for determining volatile organic compound (VOC) emissions from materials and products
using emission cells. It can be applied in principle to most
construction materials and many products used indoors. Objectives include:
1.1.1 To provide manufacturers, builders, and end users
with emission data useful for evaluating the impact of building
products, new or old, on indoor air concentrations in a model
room.
1.1.2 To promote the development of products with lower
VOC emissions.
1.2 This practice is for identifying emitted VOCs and for
determining the area specific emission rate of VOCs from
newly produced building products under defined climate conditions. The method can also be applied to aged products.
1.3 In accordance with the definition of an emission cell, it
is also possible to perform nondestructive emission measurements on building products on-site in buildings. However, the
procedure for such measurements is not described in this
practice.
1.4 This practice describes the design, construction, performance evaluation and use of emission cells for VOC emission
testing. Sampling, transport and storage of materials to be
tested, and preparation of test specimens are also described.
1.5 Air sampling and analytical methods for the determination of VOCs are described in Practice D6196. Alternative
sampling and analytical approaches for formaldehyde and
other carbonyls are described in Test Method D5197.
NOTE 1—All volatile (vapor-phase) carbonyls except formaldehyde can
be analyzed by either Practice D6196 or by Test Method D5197.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices

GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets

GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls

GSO 2084:2010
Gulf Standard
Design and application of speed control humps

Recently Published from Construction and Building Sector
GSO 2809:2025
Gulf Standard
Nonloadbearing Lightweight Thermal Insulation Concrete Masonry Units Of Foamed Concrete, Lightweight Aggregates Or Sandwich Insulating Layer

GSO 2808:2025
Gulf Standard
Aluminum composite panel for exterior cladding and interior finishing

GSO ASTM C1364:2025
ASTM C1364:23e1
Gulf Standard
Standard Specification for Architectural Cast Stone


GSO ASTM A994:2025
ASTM A994:24
Gulf Standard
Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

