GSO ASTM F3265:2021

Gulf Standard   Current Edition
Approved on  01 July 2021

Standard Test Method for Grid-Video Obstacle Measurement

Road vehicles in general
Including testing and recycling of road vehicles

GSO ASTM F3265:2021 Files

English 11 Pages
Current Edition Reference Language

GSO ASTM F3265:2021 Scope

1.1 This test method measures an automatic/automated/ autonomous-unmanned ground vehicle (A-UGV) kinetic energy reduction when objects appear in the A-UGV path and within the stop-detect range of the vehicle safety sensors in situations in which the desired reaction is for the vehicle to stop as opposed to avoiding the obstacle by traveling on an alternative path. The test method measures the performance of the A-UGV only and does not measure the effect on the stability of loads. This test method describes the use of one test piece as described in ANSI/ITSDF B56.5. Other test pieces from ANSI/ITSDF B56.5 could be used. This test method is intended for use by A-UGV manufacturers, installers, and users. This test method does not substitute for required safety testing under ANSI/ITSDF B56.5 or other normative standards. 1.2 Performing Location—This test method shall be performed in a testing laboratory or the location where the apparatus and environmental test conditions are implemented. Environmental conditions are recorded as specified in Practice F3218. 1.3 Units—The values stated in SI units are to be regarded as the standard. The values given in parentheses are not precise mathematical conversion to inch-pound units. They are close approximate equivalents for the purpose of specifying material dimensions or quantities that are readily available to avoid excessive fabrication costs of test apparatuses while maintaining repeatability and reproducibility of the test method results.

Best Sellers From Mechanical Sector

GSO 42:2015
Gulf Technical Regulation
GSO 159:1993
Gulf Technical Regulation
GSO 98:1988
Gulf Technical Regulation
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements

Recently Published from Mechanical Sector

GSO ISO 21927-7:2022
ISO 21927-7:2017 
Gulf Standard
Smoke and heat control systems — Part 7: Smoke ducts sections
GSO ISO 20474-15:2022
ISO 20474-15:2019 
Gulf Standard
Earth-moving machinery — Safety — Part 15: Requirements for compact tool carriers
GSO ISO 15871:2022
ISO 15871:2019 
Gulf Standard
Industrial trucks — Specifications for indicator lights for container handling and grappler arm operations
GSO ISO 16092-4:2022
ISO 16092-4:2019 
Gulf Standard
Machine tools safety — Presses — Part 4: Safety requirements for pneumatic presses