GSO EN 14351-2:2021
EN 14351-2:2018
Gulf Standard
Current Edition
·
Approved on
01 July 2021
Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets
GSO EN 14351-2:2021 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO EN 14351-2:2021 Scope
This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, which are applicable to internal pedestrian doorsets. Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034. This European Standard applies to doorsets intended to be used internally for construction works as: - intended use a) in escape routes; - intended use b) for specific uses with specific requirements; - intended use c) for communication only. NOTE 1 These above intended uses can be combined, for example escape routes with specific requirements. For internal pedestrian doorsets with resistance to fire and /or smoke control characteristics, this standard should only apply in conjunction with EN 16034. Products covered by this European Standard are power operated hinged or manually operated internal pedestrian doorsets and screens with flush or panelled leaves, single or double leaf, which could be completed with: - related building hardware; - door closing devices; - integral fanlights; - adjacent parts that are contained within a single frame for inclusion in a single aperture. NOTE 2 Manually operated doors with door closing devices are not considered to be power operated doors. Products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to: - industrial, commercial and garage doors and gates according to EN 13241; - external pedestrian doorsets according to EN 14351-1; - door leaves placed on the market as a single unit; - door frames placed on the market as a single unit; - power operated pedestrian doorsets, other than swing type, according to EN 16361. Doorsets can be placed on the market with their component (leaf and frame) separate when each of these components are clearly identified. This European Standard does not deal with any specific requirements on noise emitted from internal power operated hinged doorsets as their noise emission is not considered to be a relevant hazard.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices

GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets

GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls

GSO 2084:2010
Gulf Standard
Design and application of speed control humps

Recently Published from Construction and Building Sector
GSO ISO 6781-1:2024
ISO 6781-1:2023
Gulf Standard
Performance of buildings
— Detection of heat, air and moisture irregularities in buildings by infrared methods
— Part 1: General procedures


GSO ISO 19467-2:2024
ISO 19467-2:2021
Gulf Standard
Thermal Performance of windows and doors
— Determination of solar heat gain coefficient using solar simulator
— Part 2: Centre of glazing


GSO ASTM C1527/C1527M:2024
ASTM C1527/C1527M:23
Gulf Standard
Standard Specification for Travertine Dimension Stone


GSO ISO 6613:2024
ISO 6613:2023
Gulf Standard
Windows and doors - Air permeability - Test method

