GSO CISPR TR 16-2-5:2021

Gulf Standard   ACTIVE

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-5: In situ measurements for disturbing emissions produced by physically large equipment

Adoption by Endorsement

Adoption by endorsement for the latest version of this international/national standard and the previous adopted edition remains effective for 2 years starting from the date of last international update

CISPR 16-2-5:2008(E) deals with in situ electromagnetic disturbance measurements in any environment from physically large equipment and systems excluding networks. It covers both radiated and conducted emission phenomena, and does not deal with immunity tests. This technical report is intended to be applied primarily to such physically large equipment which are not under the scope of any existing emission standards (as for example CISPR 11 and CISPR 22). It serves only as a guideline on how to deal with emissions of that equipment at the particular location of installation. It does not establish any emission requirements. Due to the severe impact of the conditions existing at a particular location of operation and the use of the respective large equipment, however, it is not intended to use the measurements in the frame of type testing. Reference in-situ measurement distances will be given. This allows comparison of the measurement results with limits from existing relevant standards. The frequency range under consideration is from 9 kHz to 18 GHz.
CISPR TR 16-2-5:2008
01 July 2021



Best Sellers From Metrology Sector

GSO 1:1990
Gulf Standard
The international system of units Part 1: Quantities and base,supplementary and derived units.
GSO 2:1990
Gulf Technical Regulation
The international system of units,Part 2: decimal and sub-multiples of the SI units of rules for their use and writing theird symbols.
GSO OIML R21:2009
OIML R 21:2007 
Gulf Standard
Taximeters Metrological and technical requirements, test procedures and test report format
GSO OIML R49-2:2008
OIML R 49-2:2006 
Gulf Standard
Water meters for the metering of cold potable water and hot water. Part 2: Test Methods

Recently Published from Metrology Sector

GSO ISO 20108:2021
ISO 20108:2017 
Gulf Standard
Simultaneous interpreting — Quality and transmission of sound and image input — Requirements
GSO ISO 20473:2021
ISO 20473:2007 
Gulf Standard
Optics and photonics — Spectral bands
GSO ISO 21748:2021
ISO 21748:2017 
Gulf Standard
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
GSO ISO 17662:2021
ISO 17662:2016 
Gulf Standard
Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities