GSO ISO 7027-1:2021

ISO 7027-1:2016
Gulf Standard   Current Edition · Approved on 01 July 2021

Water quality — Determination of turbidity — Part 1: Quantitative methods

GSO ISO 7027-1:2021 Files

GSO ISO 7027-1:2021 Scope

ISO 7027-1:2016 specifies two quantitative methods using optical turbidimeters or nephelometers for the determination of turbidity of water:

a) nephelometry, procedure for measurement of diffuse radiation, applicable to water of low turbidity (for example drinking water);

b) turbidimetry, procedure for measurement of the attenuation of a radiant flux, more applicable to highly turbid waters (for example waste waters or other cloudy waters).

Turbidities measured according to the first method are presented as nephelometric turbidity units (NTU). The results typically range between <0,05 NTU and 400 NTU. Depending on the instrument design, it can also be applicable to waters of higher turbidity. There is numerical equivalence of the units NTU and formazin nephelometric unit (FNU).

Turbidity measured by the second method is expressed in formazin attenuation units (FAU), results typically range between 40 FAU and 4 000 FAU.

Best Sellers From Chemical and Textile Sector

GSO 1943:2024
 
Gulf Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO 151:2022
 
Gulf Standard
Synthetic Detergents –Household Synthetic Detergents Powder
GSO 2528:2024
 
Gulf Technical Regulation
Cosmetic products – Technical Regulation of Cosmetic and Personal Care Products Claims
GSO 2555:2021
 
Gulf Technical Regulation
General Safety Requirements of Household Detergents

Recently Published from Chemical and Textile Sector

GSO ISO 456:1994
ISO 456:1973 
Gulf Standard
Surface active agents: Analysis of soaps - Determination of free caustic alkali
GSO ISO 1139:1994
ISO 1139:1973 
Gulf Standard
Textile -designation of yarns.
GSO ISO 11610:2025
ISO 11610:2023 
Gulf Standard
Protective clothing — Vocabulary
GSO EN 1433:2025
EN 1433:2002 
Gulf Standard
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity