GSO ISO 14373:2021

Gulf Standard   Current Edition

Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels

Adoption by Endorsement

Adoption by endorsement for the latest version of this international/national standard and the previous adopted edition remains effective for 2 years starting from the date of last international update

Scope

ISO 14373:2015 specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials: uncoated steels; hot-dip zinc or iron-zinc alloy (galvannealed) coated steel; electrolytic zinc, zinc-iron, or zinc-nickel coated steel; aluminium coated steel; zinc-aluminium coated steel. It is applicable to welding of sheets of the same or dissimilar thickness, where the thickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses, where the total thickness is less than or equal to 9 mm.

Welding with the following types of equipment is within its scope: pedestal welding equipment; gun welders; automatic welding equipment where the components are fed by robots or automatic feeding equipment; multi welders; robotic welders. It also gives information, for guidance only, on appropriate welding equipment on spot welding conditions.

The welding of organic coated or primer coated steels is not within its scope.

Endorsement
ISO 14373:2015
01 July 2021
Welding processes
Including thermal cutting and cladding

Files

 
 
 

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 1780:2010
 
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements

Recently Published from Mechanical Sector

GSO EN 12572-1:2022
EN 12572-1:2017 
Gulf Standard
Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points
GSO EN 12572-2:2022
EN 12572-2:2017 
Gulf Standard
Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls
GSO EN 12574-3:2022
EN 12574-3:2017 
Gulf Standard
Stationary waste containers - Part 3: Safety and health requirements
GSO EN 12817:2022
EN 12817:2019 
Gulf Standard
LPG Equipment and accessories - Inspection and requalification of LPG pressure vessels up to and including 13 m³