GSO ISO 6768:2017
ISO 6768:1998
Gulf Standard
Current Edition
·
Approved on
03 October 2017
Ambient air -- Determination of mass concentration of nitrogen dioxide -- Modified Griess-Saltzman method
GSO ISO 6768:2017 Files
English
10 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 6768:2017 Scope
This International Standard specifies a modified Griess-Saltzman method for the determination of the mass concentration of nitrogen dioxide present in ambient air.
The method is applicable to the determination of the mass concentration of nitrogen dioxide present in ambient and confined air within the range 0,003 mg/m^(3) to 2 mg/m^(3) and for sampling times between 10 min and 2 h.
Substances present in the air mass under investigation, and thus in the air sample, and known to have an effect on the instrument reading, are given in 7.4. Information on the performance characteristics is given in 8.2.
The method is not suitable for personal breathing-zone sampling.
The Griess-Saltzman method is suitable for the analytical check of calibration gas mixtures which are used to calibrate chemiluminescence analysers (see ISO 7996).
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3
Part 1: Metrological and Technical requirements
Recently Published from Metrology Sector
GSO ISO 718:2007
ISO 718:1990
Gulf Standard
LABORATORY GLASSWARE - THERMAL SHOCK AND THERMAL SHOCK ENDURANCE —TEST METHODS
GSO ISO 23350:2025
ISO 23350:2021
Gulf Standard
Hydrometry — Catching-type liquid precipitation measuring gauges
GSO OIML R 60-1:2025
OIML R 60-1:2021
Gulf Standard
Metrological regulation for load cells — Part 1: Metrological and technical requirements
GSO ISO/TS 20490:2025
ISO/TS 20490:2024
Gulf Standard
Measuring autofocus repeatability of sharpness and latency