GSO ISO 6767:2017

ISO 6767:1990
Gulf Standard   Current Edition · Approved on 03 October 2017

Ambient air -- Determination of the mass concentration of sulfur dioxide -- Tetrachloromercurate (TCM)/pararosaniline method

GSO ISO 6767:2017 Files

English 31 Pages
Current Edition Reference Language

GSO ISO 6767:2017 Scope

This International Standard specifies a spectrophotometric method, known as the tetrachloromercurate (TCM)/pararosaniline method, for the determination of the mass concentration of sulfur dioxide in ambient air within the range of 20 μg/m^(3) to about 500 μg/m^(3). The sampling period is 30 min to 60 min. If a longer sampling period than 60 min is used, or higher concentrations of sulfur dioxide (up to about 2 000 μg/m^(3)) are expected, care is necessary to ensure that the concentrations of sulfur dioxide in the absorption solution given in clause 6, paragraph 2 are not exceeded. This can be achieved by a reduction of the volume flow rate during sampling. Sample solutions obtained by this procedure may be stored for up to 24 h before making measurements, provided that they are kept in a refrigerator at about 5 °C. Substances which are known to interfere and which might be present in the air being sampled are listed in 7.5 Indications of the precision and accuracy of the method, and of the lower detection limit are given in 8.2. Detection limit, standard deviations and interferences qualify the TCM-method for orientating field measurements in the higher concentration range. When more accurate measurements are necessary, instruments which are specially tested and calibrated should be used.

Best Sellers From Chemical and Textile Sector

GSO 1943:2024
 
Gulf Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO 151:2022
 
Gulf Standard
Synthetic Detergents –Household Synthetic Detergents Powder
GSO 2555:2021
 
Gulf Technical Regulation
General Safety Requirements of Household Detergents
GSO 575:2016
 
Gulf Standard
Facial tissue - paper

Recently Published from Chemical and Textile Sector

GSO 128:1990
 
Gulf Standard
METHODS OF TESTING FOR CRUDE PETROLEUM AND PETROLEUM PRODUCTS – DETERMINATION OF WATER IN PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS (DISTILLATION METHOD)
GSO 126:1994
 
Gulf Standard
METHODS OF SAMPLING LUBRICATING OILS
GSO ISO 2808:2025
ISO 2808:2019 
Gulf Standard
Paints and varnishes — Determination of film thickness
GSO ISO 17420-4:2025
ISO 17420-4:2021 
Gulf Standard
Respiratory protective devices — Performance requirements — Part 4: Requirements for supplied breathable gas RPD