GSO ISO 3655:2017

Gulf Standard   ACTIVE

Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table -- General introduction and testing of the accuracy

Adoption by Endorsement

Adoption by endorsement for the latest version of this international/national standard and the previous adopted edition remains effective for 2 years starting from the date of last international update

Scope
This International Standard defines machining operations on vertical turning and boring lathes with one or two columns and a Single fixed or movable table. lt defines and summarizes the different types of machines and establishes a glossary for the various types of machine tool. lt indicates, with reference to ISO 230/1, both geometrical and practical tests for such vertical lathes, and gives the corresponding permissible deviations for general purpose use machines of normal accuracy. NOTE - In addition to terms used in the three official ISO languages (English, French and Russian), this International Standard gives the equivalent terms in German, Italian and Swedish; these have been included at the request of Technical Committee ISO/TC 39 and are published under the responsibility of the member bodies for Germany F.R. (DIN), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages tan be considered as ISO terms. lt deals only with the verification of accuracy of the machine. lt does not apply to the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.) or to machine characteristics (Speeds, feeds, etc. 1, which should generally be checked before testing accuracy.
Endorsement
ISO 3655:1986
03 October 2017

Files

English
17 Pages
 
 

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 1780:2010
 
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements

Recently Published from Mechanical Sector

GSO ECE 30:2021
ECE 30:2017 
Gulf Standard
Tyres for passenger cars and their trailers
GSO ECE 60:2021
ECE 60:2013 
Gulf Standard
Uniform provisions concerning the approval of two-wheeled motor cycles and mopeds with regard to driver-operated controls including the identification of controls, tell-tales and indicators
GSO ECE 76:2021
ECE 76:1988 
Gulf Standard
UNIFORM PROVISIONS CONCERNING THE APPROVAL OF HEADLAMPS FOR MOPEDS EMITTING A DRIVING BEAM AND A PASSING BEAM
GSO EN 1074-3:2021
EN 1074-3:2000 
Gulf Standard
Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 3: Check valves