GSO ISO 21214:2016
ISO 21214:2006
Gulf Standard
Current Edition
·
Approved on
22 December 2016
Intelligent transport systems -- Communications access for land mobiles (CALM) -- Infra-red systems
GSO ISO 21214:2016 Files
English
106 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 21214:2016 Scope
This International Standard determines the air interface using infra-red systems at 820 nm to 1 010 nm.
It provides protocols and parameters for medium-range, medium- to high-speed wireless communications in the ITS sector using infra-red systems.
Such links are required for quasi-continuous, prolonged or short communications
— between vehicles and the roadside,
— between vehicles, and
— between mobile equipment and fixed infrastructure points,
over medium and long ranges.
Vehicles may be moving or stationary.
Wherever practicable, this International Standard has been developed by reference to suitable extant International Standards, adopted by selection. Required regional variations are provided.
Due account is given to, and use made of, any relevant parts of appropriate communications systems, such as global positioning systems (GPS), digital audio broadcasting (DAB), digital video broadcasting (DVB), radio local area networks (RLANs), digital data broadcasting (DDB), TETRA, FM subcarrier, mobile broadband systems (MBS, W-ATM), internet protocols, and dedicated short range communication (DSRC).
The International Standard:
— supports data rates of 1 Mbit/s up to 128 Mbit/s (it may support higher data rates);
— supports vehicle speeds up to a minimum of 200 km/h (closing speeds could be double this value);
— defines or references environmental parameters relevant to link operation;
— supports communication distances up to 100 m (it may support longer communication distances of 300 m to 1 000 m);
— supports latencies and communication delays in the order of milliseconds;
— is compliant to regional/national regulatory parameters;
— may support other regional/national parameters as applicable.
Application-specific requirements are outside the scope of this International Standard. These requirements will be defined in the CALM management and upper layer standards and in application standards.
Application-specific upper layers are not included in this International Standard, but will be driven by application standards (which may not be technology specific).
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 2698:2022
Gulf Standard
Technical Requirements for Electric Vehicles
Recently Published from Mechanical Sector
GSO ISO 7240-27:2026
ISO 7240-27:2025
Gulf Standard
Fire detection and alarm systems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors
GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025
Gulf Standard
Ladders - Part 3: Marking and user instructions
GSO ISO 22705-3:2026
ISO 22705-3:2024
Gulf Standard
Springs — Measurement and test parameters — Part 3: Cold formed cylindrical helical torsion springs
GSO ISO 14732:2026
ISO 14732:2025
Gulf Standard
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials