GSO ASTM C33/C33M:2016
Gulf Standard
Historical
·
Approved on
22 December 2016
·
Standard Specification for Concrete Aggregates
GSO ASTM C33/C33M:2016 Files
English
11 Pages
Historical
Reference Language
You can buy this standard from any member store
GSO ASTM C33/C33M:2016 Scope
This specification defines the requirements for grading and quality of fine and coarse aggregate for use in concrete. Fine aggregate shall consist of natural sand, manufactured sand, or a combination thereof. Fine aggregate shall be free of injurious amounts of organic impurities. Fine aggregate for use in concrete that will be subject to wetting, extended exposure to humid atmosphere, or contact with moist ground shall not contain any materials that are deleteriously reactive with the alkalis in the cement in amount sufficient to cause excessive expansion of mortar or concrete. Fine aggregate subjected to five cycles of the soundness test shall have a required weighted average loss. Coarse aggregate shall consist of gravel, crushed gravel, crushed stone, air-cooled blast furnace slag, or crushed hydraulic-cement concrete, or a combination thereof. The sampling and test methods shall be done with grading and fineness modulus test, organic impurities test, effect of organic impurities on strength test, soundness test, clay lumps and friable particles test, coal and lignite test, bulk density of slag test, abrasion of coarse aggregate test, reactive aggregate test, freezing and thawing test, and chert test method.
Best Sellers From Construction and Building Sector
GSO 938:2009
Gulf Standard
Test Methods for Chemical Properties of Portland Cement
GSO 1915:2009
Gulf Standard
Test Methods for Physical Properties of Portland Cement
ICS :
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
Recently Published from Construction and Building Sector
GSO ASTM C31/C31M:2023
ASTM C31/C31M:22
Gulf Standard
Standard Practice for Making and Curing Concrete Test Specimens in the Field
GSO ASTM C33/C33M:2023
ASTM C33/C33M:18
Gulf Standard
Standard Specification for Concrete Aggregates
GSO ASTM A1063/A1063M:2023
ASTM A1063/A1063M:22
Gulf Standard
Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
GSO ASTM A480/A480M:2023
ASTM A480/A480M:22a
Gulf Standard
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip