GSO ASTM C94/C94M:2016

ASTM C94/C94M:16
Gulf Standard   Current Edition · Approved on 22 December 2016

Standard Specification for Ready-Mixed Concrete

GSO ASTM C94/C94M:2016 Files

English 14 Pages
Current Edition Reference Language

GSO ASTM C94/C94M:2016 Scope

This specification covers ready-mixed concrete manufactured and delivered to a purchaser in freshly mixed and unhardened state as hereinafter specified. Requirements for quality of concrete shall be either as hereinafter specified or as specified by the purchase. In any case where the requirements of the purchaser differ from these in this specification, the purchaser's specification shall govern. In the absence of designated applicable materials specifications, materials specifications specified shall be used for cementitious materials, hydraulic cement, supplementary cementitious materials, cementitious concrete mixtures, aggregates, air-entraining admixtures, and chemical admixtures. Except as otherwise specifically permitted, cement, aggregate, and admixtures shall be measured by mass. Mixers will be stationary mixers or truck mixers. Agitators will be truck mixers or truck agitators. Test methods for compression, air content, slump, temperature shall be performed. For s strength test, at least two standard test specimens shall be made.

Best Sellers From Construction and Building Sector

GSO 1431:2002
 
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
 
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1421:2002
 
Gulf Technical Regulation
Hollow blocks made from clay for walls
GSO 2084:2010
 
Gulf Standard
Design and application of speed control humps

Recently Published from Construction and Building Sector

GSO 1437:2002
 
Gulf Standard
Methods of test for ceramic road markers .
GSO 1428:2002
 
Gulf Standard
Ceramic Sanitary Appliances - Methods Of Test for Western Water Closets
GSO 1446:2002
 
Gulf Standard
Methods of test for natural granite
GSO 1461:2002
 
Gulf Standard
Physical tests of aggregates- part -4: method for determination of shell content in coarse aggregate