GSO ISO 22262-2:2016
ISO 22262-2:2014
Gulf Standard
Current Edition
·
Approved on
22 December 2016
Air quality -- Bulk materials -- Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
GSO ISO 22262-2:2016 Files
English
47 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 22262-2:2016 Scope
ISO 22262-2:2014 specifies procedures for quantification of asbestos mass fractions below approximately 5 %, and quantitative determination of asbestos in vermiculite, other industrial minerals and commercial products that incorporate these minerals.
ISO 22262-2:2014 is applicable to the quantitative analysis of:
a) any material for which the estimate of asbestos mass fraction obtained using ISO 22262-1 is deemed to be of insufficient precision to reliably classify the regulatory status of the material, or for which it is considered necessary to obtain further evidence to demonstrate the absence of asbestos;
b) resilient floor tiles, asphaltic materials, roofing felts and any other materials in which asbestos is embedded in an organic matrix;
c) wall and ceiling plasters, with or without aggregate;
d) mineral products such as wollastonite, dolomite, calcite, talc or vermiculite, and commercial products containing these minerals.
It is not the intent of ISO 22262 to provide instruction in the fundamental microscopical and analytical techniques.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages


GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages


GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests


GSO OIML R111-1:2007
OIML R111-1:2004
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3
Part 1: Metrological and Technical requirements


Recently Published from Metrology Sector
GSO OIML R 69:2002
OIML R 69:1985
Gulf Standard
GLASS CAPILLARY VISCOMETERS FOR THE
MEASUREMENT OF KINEMATIC VISCOSITY
VERIFICATION METHOD


GSO 266:1994
Gulf Standard
Method of verification of weighbridges for road vehicles (Trucks)

GSO 1647:2002
OIML 115:1995
Gulf Standard
Methods of testing and verification for Clinical electrical thermometers with maximum device

GSO 237:1994
Gulf Standard
METHODS OF TESTING
AND CALIBRATION OF TAXIMETERS
