GSO 2530:2016
Gulf Standard
ACTIVE
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
Scope
This standard specifies the energy labelling requirements and the Minimum Energy Performance Standard (MEPS) requirements for single-package of window type, split-system non-ducted air conditioners using air-cooled condensers, split-system ducted air-conditioners using air-cooled condensers, and heat pumps using air-cooled condensers for residential, commercial and industrial sector as applicable in accordance with GSO SASO Standards. It is applied to units designed to operate in AC single phase or three phase circuits according to GSO 1899/2009 "GCC Standard voltages and frequencies for AC transmission and distribution systems".
It covers units with capacities up to and including 70000 Btu/h (20 kW).
This standard is applied to the following GSO Member States:
- Sultanate of Oman
- Yemen
This Standard is not applied to the following GSO Member States:
- United Arab Emirates
- Kingdom of Bahrain
- Kingdom of Saudi Arabia
- Kuwait
- Qatar
Annex C refers to the National regulations applied for GSO Member States excluded from this Standard
Files
English
23 Pages
165.0 SAR
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
GSO 1899:2016
Gulf Standard
GCC Standard voltages and frequencies for AC transmission and distribution systems
Recently Published from Electrical Sector
GSO IEC 60700-2:2021
IEC 60700-2:2016
Gulf Standard
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology
GSO IEC 61238-1-2:2021
IEC 61238-1-2:2018
Gulf Standard
Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U<sub>m</sub> = 1,2 kV) tested on insulated conductors
GSO IEC 61249-2-41:2021
IEC 61249-2-41:2010
Gulf Standard
Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
GSO IEC 61249-4-19:2021
IEC 61249-4-19:2013
Gulf Standard
Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
Select GSO Member Stores
Ministry of Industry, Commerce & Tourism - Kingdom of Bahrain
Ministry of Commerce and Industry - Sultanate of Oman
Ministry of Industry and Advanced Technology (MoIAT)
Saudi Standards, Metrology and Quality Organization