GSO ISO 642:2015
ISO 642:1999
Gulf Standard
Current Edition
·
Approved on
03 September 2015
Steel -- Hardenability test by end quenching (Jominy test)
GSO ISO 642:2015 Files
English
18 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 642:2015 Scope
This International Standard specifies a method for determining the hardenability of steel by end quenching (Jominy test) by using a test piece 25 mm in diameter and 100 mm long.
NOTE By agreement and for a defined field of application, the test described in this International Standard may be replaced by the calculation of the Jominy curve in accordance with an accepted mathematical model (see annex C). In case of dispute, the test shall be carried out.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls
GSO 440:2007
Gulf Standard
Calcium Silicate bricks
Recently Published from Construction and Building Sector
GSO 113:1989
Gulf Standard
TECHNICAL TERMS AND DEFINITIONS USED
IN SPINNING AND WEAVING INDUSTRY
PART 2: FABRIC DEFECTS
GSO ASTM C109/C109M:2025
ASTM C109/C109M:24
Gulf Standard
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens)
GSO ISO 22185-1:2025
ISO 22185-1:2021
Gulf Standard
Diagnosing moisture damage in buildings and implementing countermeasures — Part 1: Principles, nomenclature and moisture transport mechanisms
GSO EN 12939:2025
EN 12939:2000
Gulf Standard
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
Select GSO Member Stores
