GSO ISO 15065:2015
ISO 15065:2005
Gulf Standard
Current Edition
·
Approved on
03 September 2015
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
GSO ISO 15065:2015 Files
English
4 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 15065:2015 Scope
This International Standard specifies the dimensions and designation of countersinks for countersunk head screws with a head configuration in accordance with ISO 7721.
This International Standard is applicable to the following types of screws:
— slotted countersunk flat head screws according to ISO 2009;
— slotted countersunk raised head screws according to ISO 2010;
— slotted countersunk flat head tapping screws according to ISO 1482;
— slotted countersunk raised head tapping screws according to ISO 1483;
— cross-recessed countersunk flat head screws according to ISO 7046-1 and ISO 7046-2;
— cross-recessed countersunk raised head screws according to ISO 7047;
— cross-recessed countersunk flat head tapping screws according to ISO 7050;
— cross-recessed countersunk raised head tapping screws according to ISO 7051;
— cross-recessed countersunk flat head drilling screws according to ISO 15482;
— cross-recessed countersunk raised head drilling screws according to ISO 15483;
— hexalobular socket countersunk raised head screws according to ISO 14584;
— hexalobular socket countersunk flat head tapping screws according to ISO 14586;
— hexalobular socket countersunk raised head tapping screws according to ISO 14587.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 2698:2022
Gulf Standard
Technical Requirements for Electric Vehicles
Recently Published from Mechanical Sector
GSO ISO 19438:2025
ISO 19438:2023
Gulf Standard
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity
GSO ISO/IEC 80079-20-1:2025
ISO/IEC 80079-20-1:2017
Gulf Standard
Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data
GSO ISO 22915-10:2025
ISO 22915-10:2023
Gulf Standard
Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
GSO ISO/TR 5262:2025
ISO/TR 5262:2023
Gulf Standard
Motorcycles — Guideline for verification of total running resistance force during mode running on a chassis dynamometer
Select GSO Member Stores
