GSO IEC 60603-5:2013

IEC 60603-5:1987

Gulf Standard Current Edition · Approved on 09 September 2013

Connectors for frequencies below 3 MHz for use with printed boards. Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing

GSO IEC 60603-5:2013 Files

English 53 Pages

Current Edition Reference Language

Download Preview

Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source or from one of the member countries stores

Select our members store

Continue Shopping

GSO IEC 60603-5:2013 Scope

This standard covers a range of connectors with 2.54 mm (0.1 in) spacing intended to connect a double sided printed board to another printed board or wires. Two kinds of connector are available: – One-part edge-socket connector. Fixed connector or (female) receptacle is intended to mate with edge board contacts. – Two-part connector. Fixed connector or (female) receptacle is intended to mate with free connector of board-mounted (male) connector. For these two cases, fixed connectors or (female) receptacles are the same. Fixed connectors are available with: – solder terminations for wire, – solder terminations for board up to 3.44 mm (0.135 in), – wrapped terminations. Free connectors are provided with flat solder terminations for double sided board of nominal thickness 1.6 mm (0.063 in). For edge-socket connectors only, polarization and coding are available by means of a device mounted instead of two opposite contacts.