GSO ISO 9386-2:2013
ISO 9386-2:2000
Gulf Standard
Current Edition
·
Approved on
01 April 2013
Power-operated lifting platforms for persons with impaired mobility - Rules for safety, dimensions and functional operation - Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane
GSO ISO 9386-2:2013 Files
English
55 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 9386-2:2013 Scope
This part of ISO 9386 specifies the safety rules, dimensions and functional operation for permanently installed
power-operated stairlifts intended for use by persons with impaired mobility, for seated, standing and wheelchair
users moving in a substantially inclined plane.
It is restricted to stairlifts
a) which travel between fixed levels over a staircase or an accessible inclined surface (see note 1);
b) whose rated speed does not exceed 0,15 m/s;
c) whose rail inclination does not exceed 75° from the horizontal;
d) whose carriage is directly retained and guided by a rail or rails (see note 2).
NOTE No enclosure for the path of the stairlift is required.
This part of ISO 9386 does not specify every general technical requirement for all aspects of the electrical,
mechanical or building construction.
As far as possible, this part of ISO 9386 specifies only the requirements that materials and equipment need to meet
in the interests of safety and functional operation.
Requirements are also included for protection against harmful influences which may be experienced by equipment
installed in external locations.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 2698:2022
Gulf Standard
Technical Requirements for Electric Vehicles
Recently Published from Mechanical Sector
GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025
Gulf Standard
Ladders - Part 3: Marking and user instructions
GSO ISO 22705-3:2026
ISO 22705-3:2024
Gulf Standard
Springs — Measurement and test parameters — Part 3: Cold formed cylindrical helical torsion springs
GSO ISO 14732:2026
ISO 14732:2025
Gulf Standard
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
GSO EN 1514-4:2026
EN 1514-4:1997
Gulf Standard
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges