GSO ISO 2407:2013
ISO 2407:1997
Gulf Standard
Current Edition
·
Approved on
01 April 2013
Test conditions for internal cylindrical grinding machines with horizontal spindle -- Testing of accuracy
GSO ISO 2407:2013 Files
English
23 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 2407:2013 Scope
This International Standard specifies, with reference to ISO 230-1, both geometric and machining
tests on general purpose and normal accuracy internal cylindrical grinding machines with
horizontal spindle, whether fitted with a facing wheelhead slide or not. It also specifies the
applicable tolerances corresponding to the above mentioned tests.
This International Standard deals only with the verification of the accuracy; it applies neither to the
testing of the machine operation (vibrations, abnormal noise, stick-slip motion of components,
etc.), nor to the checking of its characteristics (such as speeds, feeds, etc.), which should
generally be checked before the testing of the accuracy.
This International Standard provides the terminology used for the principal parts of the machine
and the designation of the axes with reference to ISO 841.
NOTE — In addition to the terms used in two of the three official ISO languages (English and French),
annex A of this International Standard provides the equivalent terms in the German and Italian languages;
these are published under the responsibility of the National member bodies for Germany (DIN) and Italy
(UNI). However, only the terms given in the official languages can be considered as ISO terms.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS

GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS

GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS

GSO 2698:2022
Gulf Standard
Technical Requirements for Electric Vehicles

Recently Published from Mechanical Sector
GSO 1616:2002
Gulf Standard
Domestic and contract furniture-part 2 : methods of test for settees.

GSO 198:1994
Gulf Standard
CHEMICAL ANALYSIS OF CARBON
STEEL – DETERMINATION
OF NITROGEN

GSO 376:1994
Gulf Standard
Code of practice for the inspection and testing of steam and hot water boilers -- Part 6: Periodic internal inspection

GSO 1620:2002
Gulf Standard
Domestic and contact furiniture -part 4 :methods of testing tables.
