GSO ISO 7029:2013

ISO 7029:2000
Gulf Standard   Current Edition · Approved on 01 April 2013

Acoustics – Statistical Distribution of Hearing Thresholds as a Function of age

GSO ISO 7029:2013 Files

Arabic 9 Pages
Current Edition
English 9 Pages
Current Edition Reference Language

GSO ISO 7029:2013 Scope

This International Standard provides descriptive statistics of the hearing threshold for populations of various ages. It specifies the following, for the range of audiometric frequencies from 125 Hz to 8 000 Hz and for populations of otologically normal persons of a given age within the age limits of 18 years to 70 years inclusive: a) the expected median value of hearing thresholds given relative to the median hearing threshold at the age of 18 years; b) the expected statistical distribution above and below the median value. The data are applicable for estimating the amount of hearing loss caused by a specific agent in a population. Such a comparison is valid if the population under study consists of persons who are otologically normal except for the effect of the specific agent. Noise exposure is an example of a specific agent and for this application selected data from this International Standard are referred to as “Data Base A” in ISO 1999. The data may also be used to assess an individual’s hearing in relation to the distribution of hearing thresholds which is normal for the person’s age group. However, it is not possible to determine for an individual precisely which part of an observed hearing loss is attributable to an accumulation of detrimental effects on the hearing which increase with age, and which part has been caused by other factors such as noise. The hearing threshold deviation as defined herein and the hearing threshold level as defined in other standards (ISO 389-1, ISO 8253-1, ISO 8253-2, IEC 60645-1) express the hearing threshold of an individual or an individual ear relative to, respectively, a) the median hearing threshold of a population of 18-year-old persons, or b) a reference zero level specified in various parts of ISO 389. To the extent that the reference zero level represents the median of the 18-year-old population, the values of the two terms will be the same.

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015 
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006 
Gulf Standard
Non-automatic weighing instruments – Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004 
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3 Part 1: Metrological and Technical requirements

Recently Published from Metrology Sector

GSO ISO 20816-2:2026
ISO 20816-2:2017 
Gulf Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
GSO ISO 10713:2026
ISO 10713:2025 
Gulf Standard
Jewellery and precious metals — Gold alloy coatings
GSO IEC 61452:2026
IEC 61452:2021 
Gulf Standard
Nuclear instrumentation - Measurement of activity or emission rate of gamma-ray emitting radionuclides - Calibration and use of germanium-based spectrometers
GSO ISO 25178-605:2026
ISO 25178-605:2025 
Gulf Standard
Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Design and characteristics of non-contact (point autofocus probe) instruments