GSO 1914:2009

Gulf Standard   ACTIVE

Portland Cement

Scope
This GSO standard is concerned with the following eight types of Portland cement: 1. Type I cement (ordinary) - for use when the special properties specified for any other type are not required. 2. Type IA – Air-entraining cement for the same uses as type I, where air-entrainment is desired. 3. Type II cement - For general purposes, more especially when moderate sulphate resistance or moderate heat of hydration is desired. 4. Type IIA – Air-entraining cement for the same uses as type II, where airentrainment is desired. 5. Type III – For use when high early strength is desired. 6. Type IIIA – Air-entraining cement for the same use as type III, where airentrainment is desired. 7. Type IV – For use when a low heat of hydration is desired. 8. Type V – For use when high sulphate resistance is desired. Common cements are grouped in the European standard EN 197-1:2000 into (5) major types according to composition. Further they are further divided into (2) major classes according to pressure resistance as stipulated in tables (1) and (2) referred to in Attachment (1).
Prepare
1
11 February 2009
Construction materials
Including sustainability of construction materials

Files

 

Related Standards

Replaces
GSO 488:1994
 
REPLACED
Gulf Technical Regulation
White Portland cement.

Best Sellers From Construction and Building Sector

GSO 1914:2009
 
Gulf Standard
Portland Cement
GSO 1418:2002
 
Gulf Technical Regulation
Aluminium and aluminium alloys products for architectural application Part 1 : Sheets, strips, bars and structural Sections .
GSO 938:2009
 
Gulf Standard
Test Methods for Chemical Properties of Portland Cement
GSO 1915:2009
 
Gulf Standard
Test Methods for Physical Properties of Portland Cement ICS :

Recently Published from Construction and Building Sector

GSO ISO 404:2017
ISO 404:2013 
Gulf Standard
Steel and steel products -- General technical delivery requirements
GSO ISO 22282-6:2017
ISO 22282-6:2012 
Gulf Standard
Geotechnical investigation and testing -- Geohydraulic testing -- Part 6: Water permeability tests in a borehole using closed systems
GSO ISO 4954:2017
ISO 4954:1993 
Gulf Standard
Steels for cold heading and cold extruding
GSO ISO 2566-1:2017
ISO 2566-1:1984 
Gulf Standard
Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels