GSO OIML R114:2002
OIML R 114:1995
Gulf Technical Regulation
Current Edition
·
Approved on
21 October 2002
CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
GSO OIML R114:2002 Files
Arabic
28 Pages
Current Edition
Free
English
20 Pages
Current Edition
Reference Language
Free
GSO OIML R114:2002 Scope
1.1 This standard specifies the metrological and technical requirements for clinical electrical thermometers for continuous measurement of human or animal body temperature. Such instruments are normally used to monitor the temperature at appropriate body sites of a patient undergoing certain surgical procedures or during intensive care.
1.2 The measuring range of clinical temperature covered shall be a minimum of 35.5oC to 42.0oC, which is consistent with the range specified by Gulf Standard No GSO OIML R115: 2002 “Clinical thermometers, mercury-in-glass with maximum device”,
1.3 This standard applies to battery-or mains-powered instruments.
1.4 The instruments may be equipped to accommodate secondary indicators, printing devices, and other auxiliary devices. The metrological requirements for such accessories are not covered by this standard.
1.5 Clinical electrical thermometers designed to measure skin temperature are not covered by this standard “Clinical electrical thermometers with maximum device” are covered by GSO OIML R115 : 2002.
1.6 This standard does not exclude the use of any contact device based on other measurement principles that meets equivalent performance standards in continuously measuring temperature.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3
Part 1: Metrological and Technical requirements
Recently Published from Metrology Sector
GSO ISO 718:2007
ISO 718:1990
Gulf Standard
LABORATORY GLASSWARE - THERMAL SHOCK AND THERMAL SHOCK ENDURANCE —TEST METHODS
GSO ISO 23350:2025
ISO 23350:2021
Gulf Standard
Hydrometry — Catching-type liquid precipitation measuring gauges
GSO OIML R 60-1:2025
OIML R 60-1:2021
Gulf Standard
Metrological regulation for load cells — Part 1: Metrological and technical requirements
GSO ISO/TS 20490:2025
ISO/TS 20490:2024
Gulf Standard
Measuring autofocus repeatability of sharpness and latency