GSO 35:2007

Gulf Standard   ACTIVE

Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines

Scope
This standard is concerned with the methods of test for 6V and 12V lead-acid batteries, used primarily as a power source for starting, lighting auxiliary equipment and ignition current of internal combustion engine used in vehicles. It covers the methods of tests for the batteries covered in the standard mentioned in Sub-clause 2.1.
Prepare
2
26 September 2007

Files

 

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines
GSO 1899:2016
 
Gulf Standard
GCC Standard voltages and frequencies for AC transmission and distribution systems

Recently Published from Electrical Sector

GSO IEC 60700-2:2021
IEC 60700-2:2016 
Gulf Standard
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology
GSO IEC 61238-1-2:2021
IEC 61238-1-2:2018 
Gulf Standard
Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U<sub>m</sub> = 1,2 kV) tested on insulated conductors
GSO IEC 61249-2-41:2021
IEC 61249-2-41:2010 
Gulf Standard
Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
GSO IEC 61249-4-19:2021
IEC 61249-4-19:2013 
Gulf Standard
Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly