GSO ISO 20585:2007
ISO 20585:2005
Gulf Standard
Current Edition
·
Approved on
26 September 2007
Wood-based panels - Determination of wet bending strength after immersion in water at 70 degrees C or 100 degrees C (boiling temperature)
GSO ISO 20585:2007 Files
English
4 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 20585:2007 Scope
This International Standard specifies methods for determining the bending strength of particleboards and
fibreboards after immersion in hot water. Method A is applicable for water at 70 °C and Method B for water at
100 °C (boiling temperature).
NOTE The boiling temperature can slightly differ depending on the altitude above sea level.
Best Sellers From Construction and Building Sector
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 2489:2015
Gulf Standard
Specifications of Recycled Aggregates from Construction
Waste to be used in construction Works
GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls
Recently Published from Construction and Building Sector
GSO ISO 679:2026
ISO 679:2009
Gulf Standard
Cement — Test methods — Determination of strength
GSO ISO 50002-2:2026
ISO 50002-2:2025
Gulf Standard
Energy audits — Part 2: Guidance for conducting an energy audit using ISO 50002-1 in buildings
GSO ASTM C1170/C1170M:2026
ASTM C1170/C1170M:20
Gulf Standard
Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
GSO EN 13888-1:2026
EN 13888-1:2022
Gulf Standard
Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
Select GSO Member Stores
