GSO ISO 16332:2025
ISO 16332:2018
Gulf Standard
Current Edition
·
Approved on
14 October 2025
Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency
GSO ISO 16332:2025 Files
English
44 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO 16332:2025 Scope
ISO 16332:2018 specifies a fuel/water separator comparison test under defined and simplified laboratory conditions.
This test is intended for pressure side fuel/water separators as well as for suction side fuel/water separators. Pressure side fuel/water separators are tested with fine droplets and suction side filters are tested with coarse droplets using the same test rig layout.
The rated flow (in litres per hour) is intended for the range between 50 l/h and 1 500 l/h. By agreement between customer and fuel/water separator manufacturer, and with some modifications, the procedures can be used for fuel/water separators with higher or lower flow rates.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 2698:2022
Gulf Standard
Technical Requirements for Electric Vehicles
Recently Published from Mechanical Sector
GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025
Gulf Standard
Ladders - Part 3: Marking and user instructions
GSO ASTM D8002:2026
ASTM D8002:24
Gulf Standard
Standard Test Method for Modified Fouling Index (MFI-0.45) of Water
GSO EN 1514-8:2026
EN 1514-8:2004
Gulf Standard
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges
GSO ASTM D7285:2026
ASTM D7285:25
Gulf Standard
Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems