GSO ISO/ASTM 51702:2017
ISO/ASTM 51702:2013
Gulf Standard
Current Edition
·
Approved on
03 October 2017
Practice for dosimetry in a gamma facility for radiation processing
GSO ISO/ASTM 51702:2017 Files
English
8 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ISO/ASTM 51702:2017 Scope
1.1 This practice outlines the installation qualification program
for an irradiator and the dosimetric procedures to be
followed during operational qualification, performance qualification,
and routine processing in facilities that process products
with ionizing radiation from radionuclide gamma sources
to ensure that product has been treated within a predetermined
range of absorbed dose. Other procedures related to operational
qualification, performance qualification, and routine processing
that may influence absorbed dose in the product are also
discussed.
NOTE 1—Dosimetry is only one component of a total quality assurance
program for adherence to good manufacturing practices used in radiation
processing applications.
NOTE 2—ISO/ASTM Practices 51818 and 51649 describe dosimetric
procedures for low and high enery electron beam facilities for radiation
processing and ISO/ASTM Practice 51608 describes procedures for X-ray
(bremsstrahlung) facilities for radiation processing.
1.2 For the radiation sterilization of health care products,
see ISO 11137-1. In those areas covered by ISO 11137-1, that
standard takes precedence.
1.3 This document is one of a set of standards that provides
recommendations for properly implementing and utilizing
dosimetry in radiation processing. It is intended to be read in
conjunction with ASTM Practice E2628.
1.4 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate
safety and health practices and determine the applicability
of regulatory limitations prior to use.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages


GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages


GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests


GSO OIML R111-1:2007
OIML R111-1:2004
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3
Part 1: Metrological and Technical requirements


Recently Published from Metrology Sector
GSO OIML R 69:2002
OIML R 69:1985
Gulf Standard
GLASS CAPILLARY VISCOMETERS FOR THE
MEASUREMENT OF KINEMATIC VISCOSITY
VERIFICATION METHOD


GSO 266:1994
Gulf Standard
Method of verification of weighbridges for road vehicles (Trucks)

GSO 1647:2002
OIML 115:1995
Gulf Standard
Methods of testing and verification for Clinical electrical thermometers with maximum device

GSO 237:1994
Gulf Standard
METHODS OF TESTING
AND CALIBRATION OF TAXIMETERS
