GSO ASTM D6074:2016
ASTM D6074:15
Gulf Standard
Current Edition
·
Approved on
22 December 2016
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
GSO ASTM D6074:2016 Files
English
11 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable.
You can acquire it directly from its source or from one of the member countries stores
GSO ASTM D6074:2016 Scope
1.1 This guide suggests physical, chemical, and toxicological test methods for characterizing hydrocarbon lubricant base oils derived from various refining processes including re-refining used oils and refining crude oil. This guide does not contain limits nor does it purport to cover all tests which could be employed; rather, it represents the first step in better describing important parameters of lubricant base oils affecting lubricant performance and safe handling. Tests have been identified to characterize the composition and performance of base oils in addition to verifying their consistency. Undesirable components have also been identified with a range of typical levels. These are not limits. It is the responsibility of the buyer and seller to determine and agree upon the implementation of this guide.
1.2 This guide applies only to base oils and not to finished lubricants.
1.3 Base oils containing detectable levels of esters, animal fats, vegetable oils, or other materials used as, or blended into, lubricants are not covered by this guide.
1.4 This guide is relevant to base oils composed of hydrocarbons and intended for use in formulating products including automotive and industrial lubricants. Although not intended to cover all base oil viscosity grades, this guide does cover the majority of viscosities that would be used in both automotive and industrial oil formulations. These base oils would typically have a viscosity of approximately 2 mm2/s to 40 mm2/s (cSt) at 100 °C (50 SUS to 3740 SUS at 100 °F).
1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Best Sellers From Oil and Gas Sector
GSO 1180:2021
Gulf Standard
Automatic transmission fluid (ATF)

GSO 672:2010
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).

GSO 1161:2021
Gulf Standard
HLP HYDRAULIC OILS

GSO 2196:2021
Gulf Standard
Gulf Guide of Standard Specification for Unleaded Gasoline

Recently Published from Oil and Gas Sector
GSO ASTM D6138:2025
ASTM D6138:23a
Gulf Standard
Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)


GSO ASTM D4289:2025
ASTM D4289:24a
Gulf Standard
Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids


GSO ISO 23581:2025
ISO 23581:2024
Gulf Standard
Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer


GSO ISO 3924:2025
ISO 3924:2019
Gulf Standard
Petroleum products — Determination of boiling range distribution — Gas chromatography method

